As we all know, 200-125 exam is a required test for Cisco CCNA Routing and Switching certification. Candidates, who want to enter Cisco industry or want to find a job with Cisco products, need to pass 200-125 exam successfully. In our previous articles, we have introduced How to pass your 200-125 CCNA Routing and Switching exam? In this article, you will know that our 200-125 training material is an important part in your preparation. 

 

New Cisco certification 200-125 CCNA training material has been updated recently, which cover 551 questions and answers. Some customers will ask, how can I check whether your 200-125 training material is valid or not? It is simple for you here, I will share some 200-125 training questions below. 

 

You are verifying the EIGRP configurations in the topology statement is true?

A. Branch2 LAN network 172.16.11.0/24 is not advertised into the EIGRP network

B. Branch2 LAN network 172.16.10.0/24 is not advertised into the EIGRP network

C. R3 server farm2 network 10 20 30.0/24 is not advertised into the EIGRP network

D. Branch1 LAN network 172.16.12.0/24 is not advertised into the EIGRP network

Answer: D

 

The GRE tunnel between r3 and Branch 1 is down. Which cause of the issue is true?

A The tunnel source loopback0 interface is not advertised into EIGRP in Branch1.

B The tunnel source loopback0 interface is not advertised into EIGRP in R3

C The EIGRP neighbor relationship was not formed due to EIGRP packets blocked by inbound ACL on R3

D The EIGRP neighbor relationship was no formed due the IP address being misconfigured between the R2 and R3 interfaces

Answer: C

 

The traffic from Branch to the main office is using the secondary path instead of the primary path connected to R2 Which cause of the issue is true?

A. The network 192.168. 11. 0/30 was not advertised into EIGRP on Branch2

B. The IP address was misconfigured between the Branch2 and R2 interfaces

C. EIGRP packets were blocked by the inbound ACL on branch

D. The primary path has more link delay configured then secondary path which causes EIGRP to choose the secondary path.

Answer: C

 

The traffic from Branch to the main office is using the secondary path instead of the primary path connected to R2. Which cause of the issue is true?

A. The network 192.168. 11. 0/30 was not advertised into EIGRP on Branch2

B. The IP address was misconfigured between the Branch2 and R2 interfaces

C. EIGRP packets were blocked by the inbound ACL on branch

D. The primary path has more link delay configured then secondary path which causes EIGRP to choose the secondary path.

Answer: C

 

If you want to check more Cisco 200-125 CCNA exam questions, you can also send email to us via [email protected]

We provide two versions for Cisco certification 200-125 CCNA training material. They are PDF and Software. You can print Cisco 200-125 CCNA training material PDF version out to read all the questions and answers, and you can also use your mobile phone to study our 200-125 CCNA training material PDF. Maybe some candidates do not know what 200-125 software is. I will show the homepage of our 200-125 CCNA training material software version below. 

 

The above is the screenshot of our Cisco 200-125 CCNA training material software version, you can check the details.